Meeting Update 07/17/2012 - Eddie

I have some partial runs of my 3D jet simulations. They are all 256 processor jobs on bluegene with rev 950. Here is that chart of all the runs I want to do:

run n jet eta chi required x res base grid levels actual cells per cooling length cells per jet radius
A 0.1 0.01 0.0015 78,335 … … … …
B 1 0.1 0.034 3495 56 x 28 x 28 6 10.15 298.67
C 10 1 0.358 335 48 x 24 x 24 3 11.46 32
D 100 10 1.367 88 48 x 24 x 24 3 43.74 32
E 1000 100 2.428 50 48 x 24 x 24 3 77.70 32

Run A was not even attempted, run B was taking too long so I have to figure out a better way to refine. Martin showed me how I can use a particle to refine only the jet head. I need to play around with this to make sure I get it right for each simulation. In the meantime, I have submitted restarts for runs C, D, and E to finish them up.

It's kind of tricky to compare the different runs on the same color scale since they are all in slightly different density regimes. Here are snapshots of C, D, and E at the same time:

Run Chi Image
C 0.358
D 1.367
E 2.428

Run C ran the longest, so here is a video (the color scale here is different from the color scale above):

rho10.gif​


The majority of my time is spent on studying for the prelim now.

Attachments (4)

Comments

No comments.