Changes between Version 42 and Version 43 of 1DPulsedJets

Timestamp:

03/08/12 15:34:35 (13 years ago)

Author:

ehansen

Comment:

—

1DPulsedJets

@@ -197 +197 @@
 [[Image(temp_res1.png,width=400)]]
 
-=== Shock Structure ===
+==== Shock Structure ====
 I've made some lineouts of density, velocity, pressure, and temperature to get a better understanding of how the simulation is interpreting the shock structure.  Every image is taken at the middle of the simulation for the highest resolution run.  The solid black line is density, dashed blue is velociity, dotted green is pressure, and dash/dot red is temperature.  Everything is in computational units, and it's plotted on a log scale.  The structure is more difficult to see in the cooling cases, so I included some magnified images for those two cases.
 [[CollapsibleStart(No Cooling)]]
@@ -215 +215 @@
 
 == 1D Radiative Shock Simulations ==
-These simulations follow Ch. 4 of Delamarter '01 and his treatment of the 1D "steady" radiative shock problem.  Here are some useful links:
-[http://www.pas.rochester.edu/~bearclaw/delamarterplots.html]
-
-[http://www.pas.rochester.edu/~bearclaw/paper_library/Delamarter01.pdf]
+These simulations follow Ch. 4 of Delamarter '01 and his treatment of the 1D "steady" radiative shock problem.  The purpose of this problem is to check that the cooling source terms are being handled correctly.  Here are some useful links:
+
+[http://www.pas.rochester.edu/~bearclaw/delamarterplots.html AstroBEAR 1.0 test page]
+
+[http://www.pas.rochester.edu/~bearclaw/paper_library/Delamarter01.pdf Delamarter '01 pdf]
+
+=== Equations ===
+
+=== Initial Parameters ===
+
+=== Results ===