Changes between Version 31 and Version 32 of MachStems

Timestamp:

07/10/15 17:27:49 (10 years ago)

Author:

ehansen

Comment:

—

MachStems

@@ -52 +52 @@
 2-clump setup (runs A - F): Clumps separated by a distance d measured in clump radii. Clump velocities given in terms of their Mach numbers.
 
-3-clump setup (runs G - L): See diagram below. The clumps are labeled by their Mach numbers. The clump separation d (measured in clump radii) and angle a are the defining parameters that change for each run. The point labeled '''O''' marks the observer. The position of the observer is determined by two angles: the rotation angle phi is denoted in the diagram, and the inclination angle i cannot be shown in a top view diagram, but it is simply the angle at which the flow is directed towards the observer (0 deg is perpendicular and 90 is directly at the observer).
+3-clump setup (runs G - L): See diagrams below. The clumps are labeled by their Mach numbers. The clump separation d (measured in clump radii) and angle a are the defining parameters that change for each run. The point labeled '''O''' marks the location of the observer from which a line of sight is drawn to generate the emission maps. The position of the observer is determined by two angles: the rotation angle phi is denoted in the top view diagram, and the inclination angle i is denoted in the side view diagram.
 
 [[Image(3clumpsetup.png,width=250)]]
+[[Image(3clumpsetupside.png,width=250)]]
 
 multi-clump setup (run M): In x and z, the clumps are arranged in a 3-4-3 lattice-like structure. Each clump is given a random position in y and an appropriate velocity based on that y-position so that the clump does not run off the grid during the simulation.