Changes between Version 9 and Version 10 of TestSuite/FieldLoopAdvection


Ignore:
Timestamp:
11/04/11 14:03:47 (13 years ago)
Author:
ehansen
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • TestSuite/FieldLoopAdvection

    v9 v10  
    1515== Results ==
    1616=== Original Test ===
    17 The new chombo can be verified by looking at the magnitude of the magnetic field in the x-direction.  You should see that the field loop has advected to the right, and is rotating counter-clockwise as shown by the reference chombo.
     17The new chombo can be verified by looking at the magnitude of the magnetic field in the x-direction.  In this test, the field loop advects to the right for 1.0 seconds. Due to the periodic boundary conditions, the loop should come back to its original position which is in the middle of the domain.
    1818=== Restart Test ===
    19 The test is restarted from the end of the original test and run a bit further.  You should see that the field loop has advected more to the right and is starting to come back around as shown in the restart reference chombo.
     19The test is restarted from 0.5 seconds (halfway) into the original test and run to 1.0 seconds.  Therefore, the loop should again be back at its original position.  Both reference chombos should look the same.
    2020
    2121||= Test =||= Reference Chombo =||= New Chombo =||
    2222||= Original =||= [[Image(Bx_ref.png, width=500)]] =||= ??? =||
    23 ||= Restart =||= [[Image(restart_ref.png, width=500)]] =||= ??? =||
     23||= Restart =||= [[Image(Bx_ref_restart.png, width=500)]] =||= ??? =||
    2424
    2525[http://clover.pas.rochester.edu/testresults/FieldLoop2D/testlog Test Log]