wiki:u/JCMar2212

Version 8 (modified by trac, 12 years ago) ( diff )

The Star Formation Rate of Supersonic MHD Turbulence (Padoan and Nordlund 2011)

Attempt to determine for isothermal self-gravitating MHD turbulence.

The Model

Post shock density

If we balance ram pressure of flow at any scale with thermal pressure of shocked material then we get post shock densities () that are

where

and if then

Shock thickness

Flows on a given scale will be coherent for a time

and will built up a sheet with a surface density of

and will therefore have a thickness of

or .

Since , this thickness is independent of scale and

So flows on all scales will produce shocks of the same thickness, but the post shock densities will increase with scale.

Shock instability

If then the shocked layer will be unstable to collapse so we can define a critical density based on the shock layer thickness

So for a given cloud, we can estimate the densities we need to reach in the shocked layers to trigger collapse. Then using the lognormal density distribution seen for supersonic turbulence

where and

We can calculate the amount of gas above the critical density and the characteristic time for that mass to form stars as with some efficiency giving a star formation rate of or the standard "star formation rate per free fall time"

They assumed that in the hydro case

MHD?

For MHD a similar analysis can be carried out although the post shock must be measured. The main modification is that the post shock magnetic pressure must also be taken into account.

The setups

The results



Conclusions

  • SFR can be modeled by turbulent processes creating over densities
  • Overdense gas is continually replenished on time scales <
  • Critical density has the same dependence on and as in Krumholz and McKee, but the dependency on the SFR is different. This is because Krumholz and McKee assume that overdense gas is replenished on a time scale and not . The results of the simulations agree well with and not with since . Higher energy flows create thinner shocks which have to reach higher densities before collapsing - but once they do, they collapse more quickly.

Questions

  • Does driving turbulence before turning on gravity, give turbulence a head start in dominating structures on all scales?
  • Does their choice of periodic boundaries prevent gravity's strongest mode? The box is 5-10 Jeans lengths so it should globally collapse in 1 free fall time. Periodic boundaries == Fictitious dark energy…

By .4 t_ff, the radius is at .9 and the density should have increased by 30%…

  • Is it fair to assume that every cell that is denser then will collapse? Or that every cell denser than is surrounded by enough mass to collapse? so for all the choices of and . But numerous instabilities can destabilize the shocks before they have built up a thick layer of material… Especially the NTSI (Blondin & Marks 1996). It would have been instructive to have seen an IMF

Colliding Supersonic Flows

movie

Clustered Star Formation in Magnetic Clouds: Properties of Dense Cores Formed in Outflow-Driven Turbulence (Nakamura & Li)

  • 1.5 pc box with a 939 Msolar core
  • Initial turbulence is imposed with vk ~ k-4 and allowed to decay
  • Stars that form inject momenta proportional to accretion rate back into surrounding gas
  • 3 simulations at 2563
    • (N)
    • (W)
    • (S) (initial virial equilibrium with turbulence)

Attachments (8)

Note: See TracWiki for help on using the wiki.