Version 76 (modified by 10 years ago) ( diff ) | ,
---|
Documents and Papers
Simulation and Restuls
4.15.2015
1. Parameters
Check blog:afrank04152015 for details
Hot Jupiter
Stellar Wind
km/s
Other parameters.
Resolution: 60 zone/planet radius -check
Allow planetary wind to fill grid for 2 of its own crossing times ( L_grid/V_pw(max) ) then turn on stellar wind and let it run for 10 crossing times ( L_grid/V_s )
2. Check lambda — no stellar wind
Rp=Outflow radius + thickness !! where the radius defines the location of boundary and thickness for wrapping up the velocity
ns/np=1e-4 gamma = 1.01;
lambda=2.6 | Mp = 0.5 Mj | Rp = 2Rj | Tp=2e4 | namb=1e-4 | low res movie | high res movie | ; zoomed high res movie |
lambda=5.3 | Mp = 0.5 Mj | Rp = 2Rj | Tp=1e4 | namb=1e-4 | low res movie | high res movie | |
lambda=5.3 | Mp = 0.5 Mj | Rp = 2Rj | Tp=1e4 | namb=1e-5 | high res movie | ;;zoomed in high res movie | |
lambda=5.3 | Mp = 0.5 Mj | Rp = 2Rj | Tp=1e4 | namb=1e-6 | high res movie | ||
lambda=5.3 | Mp = 0.5 Mj | Rp = 2Rj | Tp=1e4 | namb=1e-8 | high res movie | ||
lambda=5.3 | Mp = 1 Mj | Rp = 4Rj | Tp=1e4 | namb=1e-4 | low res movie | ||
lambda=10.6 | Mp = 1 Mj | Rp = 2Rj | Tp=1e4 | namb=1e-4 | low res movie | high res movie | |
lambda=10.6 | Mp = 0.5 Mj | Rp = 1Rj | Tp=1e4 | namb=1e-4 | low res movie | ||
lambda=10.6 | Mp = 0.5 Mj | Rp = 2Rj | Tp=5e3 | namb=1e-6 | Tamb=1000; zoomed in movie |
3. Backflow check for different line width of line plot — positive value means back flow
Where is the width of line plot for the integrate.
L= 0.5 Rp | |
L = 1 Rp |
3. Runs and Results
Mp=0.5; Rp=2; lambda=5.3
# | gamma | Solar Wind Mach # | |||
1 | 1.01 | 0.8 | 10-4 | low res 2.5D | high res 2.5D |
2 | 1.01 | 0.8 | 10-4 | ||
3 | 1.3 | 0.8 | 10-4 | low res 2.5D namb=1e-4;low res 2.5D namb=1e-5;low res 2.5D namb=1e-8; | transfering |
4 | 1.3 | 0.8 | 10-4 | ||
5 | 1.01 | 5.0 | 10-4 | low res 2.5D | high res 2.5D |
6 | 1.01 | 5.0 | 10-4 | ||
7 | 1.01 | 5.0 | 10-5 | low res 2.5D;low res 2.5D large | high res 2.5D |
8 | 1.01 | 5.0 | 10-3 | low res 2.5D namb=1e-5 | to be analyzed |
9 | 1.3 | 5.0 | 10-4 | low res 2.5D namb=1e-5;low res 2.5D namb=1e-6 | high res 2.5D |
10 | 1.01 | 0.8 | 10-3 | low res 2.5D namb=1e-5; | analyzing |
4. New runs
Mp=0.5Mj; Vs=100km/s; namb=1e-6; lambda=5.3
# | gamma | Solar Wind Mach # | Tp | Ts | low-res results | high-res results | |
1 | 1.01 | 0.8 | 10-5 | 1E4 K | 1.86E+6 K | low res 2.5D Tamb=0.01K small box; low res 2.5D Tamb=0.01K large box;low res 2.5D Tamb=1000K; | |
2 | 1.01 | 5.0 | 10-5 | 1E4 K | 47632.6 K | high res 2.5D Tamb=0.01K; | |
3 | 1.3 | 0.8 | 10-5 | 1E4 K | 1.45E+6 K | low res 2.5D, Tamb=0.01K;low res 2.5D, Tamb=1000K; | |
4 | 1.3 | 5.0 | 10-5 | 1E4 K | 37006.8 K | low res 2.5D Tamb=0.01K; low res 2.5D Tamb=1000K; | queued on standard partition |
Attachments (1)
- backflowFlag.png (285.3 KB ) - added by 10 years ago.
Download all attachments as: .zip
Note:
See TracWiki
for help on using the wiki.